VIP X2
| Installation and Operating Manual
EN | 71
Bosch Security Systems | 2006-12 | V2.5
Configuration using a Web browser
Destination IP address:
For each number enter the corresponding IP address for the desired remote sta-
tion.
Destination password:
If the remote station is password protected, enter the password here.
You can save up to ten target IP-addresses on this page. This means that also
only ten passwords for connections can be defined here. If more than ten con-
nections are necessary, for example when connections are initiated by a control-
ling system, such as VIDOS or Bosch Video Management System, you can
define a general password. The VIP X2 can make connections with this general
password to all devices protected by that same password. In such cases, pro-
ceed as follows:
– Select
10
in the
Number of destination IP address
list box.
– Enter
0.0.0.0
in the
Destination IP address
field.
– Enter the password in the
Destination password
field.
– Set the
user
password of all the devices to be connected to this password.
Note
Setting target 10 to the destination IP address 0.0.0.0 will override its func-
tion as the tenth address to try for auto-connect on alarm. Instead the pa-
rameter is used only to store the general password.
Remote port:
Choose the browser-port, depending on the network configuration. Port 443 for
HTTPS connections is only available if the
On
option in
SSL encryption
is
active.
