background image

VIP X1600 XFM4

General Information | en

2

Bosch Security Systems

Quick Installation Guide

F.01U.088.580 | V4.0 | 2009.03

1

General Information

These instructions "Quick Installation Guide" refer to encoder 

modules VIP X1600 XFM4A and VIP X1600 XFM4B. The encoder 

modules are intended for installation in the following devices:

VIP X1600 XF base

VIP X1600 B base

The VIP X1600 base is not supported.

You can find further detailed information in the extensive online 

help for the device in question.

Additional language versions of these instructions "Quick 

Installation Guide", the Installation and Operating Manuals for 

the VIP X1600 XFM4 encoder module and the base being used, 

as well as the 4.0 firmware are available on 

www.boschsecurity.com.

!

CAUTION! 

You should always make yourself familiar with the required 

safety measures in the relevant chapters of the Installation and 

Operating Manuals for the VIP X1600 XFM4 encoder module 

and the base being used (see product CD in the scope of 

delivery for the base being used). The manuals on the product 

CD contain important information on the installation and 

operation of the devices.

These instructions "Quick Installation Guide" only show the 

basic installation of a VIP X1600 XFM4A or VIP X1600 XFM4B 

encoder module, they are no substitute for the complete user's 

manual.

Summary of Contents for VIP-X1600-XFM4A













Reviews: