VideoJet X10 SN
Installation | en
19
Bosch Security Systems
Installation and Operating Manual
DOC | V4.0 | 2009.06
4
Installation
4.1
Preparations
Please ensure the following installation conditions:
–
Do not install the unit close to heaters or other heat sources. Avoid locations exposed to
direct sunlight.
–
Allow sufficient space for running cables.
–
Ensure that the unit has adequate ventilation.
–
When making connections, use only the cables supplied or use appropriate cables
immune to electromagnetic interference.
–
Position and run all cables so that they are protected from damage, and provide
adequate cable strain relief where needed.
–
Avoid impacts, blows and severe vibrations that exceed the specification limits (see
Section 9 Specifications, page 113
), as these can irreparably damage the unit.
4.2
Mounting
You can purchase a rack-mount kit from Bosch Security Systems, which is designed to
accommodate three VideoJet X10 SN.
!
CAUTION!
The unit is intended for use indoors or in housings.
Select a suitable location for installation that guarantees to meet the environmental
conditions. The ambient temperature must be between 0 and +50 °C (+32 and +122 °F). The
relative humidity must not exceed 95%.
The VideoJet X10 SN generates heat during operation, so you should ensure that there is
adequate ventilation and enough clearance between the unit and heat-sensitive objects or
equipment.
Summary of Contents for VideoJet X10 SN
Page 1: ...VideoJet X10 SN Network Video Server en Installation and Operating Manual ...
Page 2: ...VideoJet X10 SN ...
Page 123: ......
