VG5 Series Replacement Bubbles
Replacing a VG5 Series Bubble | en
9
Bosch Security Systems, Inc.
Installation Guide
F.01U.250.237 | 1.0 | 2011.08
5.
Remove the inner trim ring and remove the old bubble
from the trim ring.
6.
Insert the replacement bubble into the outer trim ring and
align the tabs on the bubble with the slots on the outer
trim ring.
7.
Place the inner trim ring over the bubble and align the lock
screw slot on the inner ring with the lockscrew slot on the
outer trim ring (item 3, above).
8.
Secure the inner ring to the outer ring using the four
screws removed earlier.
9.
Clean the bubble according to the instructions in
Section 2.2 Cleaning, page 6
.
10. Place the replacement bubble and trim ring assembly onto
the in-ceiling housing, and rotate it clockwise
approximately 1/4 turn until it stops. Then tighten the lock-
screw.
Summary of Contents for VGA-BUBBLE-CCLA
Page 1: ...VG5 Series Replacement Bubbles VGA BUBBLE en Installation Guide ...
Page 2: ......
Page 13: ......
