VG5 Series Replacement Bubbles
Replacing a VG5 Series Bubble | en
11
Bosch Security Systems, Inc.
Installation Guide
F.01U.250.237 | 1.0 | 2011.08
4.
Remove the old bubble from the trim ring:
a.
Locate the four tabs (item 1, below) inside the trim
ring that attach the trim ring to the bubble.
b.
Gently push each tab out and down (away from the
bubble) to disengage the tabs.
c.
Remove the bubble from the trim ring.
5.
Insert the replacement bubble inside the trim ring and
align the release tab (item 2) on the trim ring with the
release slot on the bubble.
6.
Clean the bubble according to the instructions in
Section 2.2 Cleaning, page 6
.
7.
Insert the replacement bubble and trim ring assembly into
the pendant housing, and rotate it clockwise until it locks.
The latch mechanism makes a click when it locks.
Summary of Contents for VGA-BUBBLE-CCLA
Page 1: ...VG5 Series Replacement Bubbles VGA BUBBLE en Installation Guide ...
Page 2: ......
Page 13: ......
