UML-190-90
Safety | en
3
Bosch Security Systems, Inc.
Installation Manual
F01U075712 | 1.0 | 2007.09
1.3
Important notices
Accessories -
Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury and/or serious damage to the unit. Use only with the cart,
stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use
caution and care when moving the cart/apparatus combination to avoid injury from tip-over.
Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to
overturn. Mount the unit per the manufacturer's instructions.
All-pole power switch -
Incorporate an all-pole power switch, with a contact separation of at
least 3 mm in each pole, into the electrical installation of the building.
If it is needed to open the housing for servicing and/or other activities, use this all-pole switch
as the main disconnect device for switching off the voltage to the unit.
Coax grounding:
–
Ground the cable system if connecting an outside cable system to the unit.
–
Connect outdoor equipment to the unit's inputs only after this unit has had its grounding
plug connected to a grounded outlet or its ground terminal is properly connected to a
ground source.
–
Disconnect the unit's input connectors from outdoor equipment before disconnecting the
grounding plug or grounding terminal.
–
Follow proper safety precautions such as grounding for any outdoor device connected to
this unit.
U.S.A. models only -
Section 810
of the
National Electrical Code, ANSI/NFPA No.70
, provides
information regarding proper grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
Disposal -
Your Bosch product was developed and manufactured with high-quality material
and components that can be recycled and reused. This symbol means that electronic and elec-
trical appliances, which have reached the end of their working life, must be collected and dis-
posed of separately from household waste material. Separate collecting systems are usually in
place for disused electronic and electrical products. Please dispose of these units at an envi-
ronmentally compatible recycling facility, per
European Directive 2002/96/EC
.
Environmental statement -
Bosch has a strong commitment towards the environment. This
unit has been designed to respect the environment as much as possible.
Electrostatic-sensitive device -
Use proper CMOS/MOS-FET handling precautions to avoid
electrostatic discharge.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when
handling the electrostatic-sensitive printed circuit boards.
CAUTION!
Low risk: (without safety alert symbol)
Indicates a potentially hazardous situation.
if not avoided, this may result in property damage or risk of
damage to the unit.
i
NOTICE!
This symbol indicates information or a company policy that
relates directly or indirectly to the safety of personnel or
protection of property.
