Small Size LCD/LED Monitors
Navigating the Monitor | en
29
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
6.2
Navigating the Monitor On-screen Display
(OSD)
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-
90 have two (2) modes: Video and PC. The LCD is programmed
through the on-screen display (OSD) menus and submenus
where an operator can select operating parameters. To access
the OSD menus, press the Menu button on the front panel. Use
the front panel of the monitor to make any necessary
adjustments to the OSD.
To navigate the set up menus, follow the steps below:
1.
Connect the CVBS, S-Video or the VGA cable.
2.
Press the Power button to turn on the unit (see
Figure 6.1
).
3.
If required, press the Input button and the
and
buttons until a signal is displayed.
4.
Press the Menu button to activate the main menu
selections (see
Figure 6.1
).
5.
Press the
and
buttons to select a menu.
6.
Press the Input button to enter the selected menu.
7.
Press the
and
buttons to select a sub-menu item.
8.
Press the Input button to enter the selected sub-menu.
9.
Press the
and
buttons to toggle the OSD values.
10. Press the Menu button to exit the selected menu and to
return to the menu bar or to confirm a selection.
11. Press the Menu button again to exit the OSD menu bar.
NOTICE!
When you are navigating through the OSD menus, use the Input
button to select a menu and use the Menu button to exit a
menu.
Summary of Contents for UML-080
Page 1: ...Small Size LCD LED Monitors UML 080 90 UML 082 90 UML 100 90 UML 102 90 en User Manual ...
Page 2: ......
Page 41: ......
