manualshive.com logo in svg

Bosch UEZ, Operation Manual, Page: 6 / 48

Share
Download
Bosch UEZ Operation Manual Download Page 6

614–30.0212.0270–01   A2

6

Explanation of Display and Operating Elements

Message processing keys / softkeys with display

Message processing keys/softkeys:
Using the 4 message processing keys/softkeys, the messages/functions shown
above the keys in the display can be called up.
The text shown in the display above each key indicates the operation of each key.
Pressing the                   key displays further messages/functions with notes regarding
the additional operating steps.

Quiescent condition: 
If the central control unit is in the quiescent condition, e.g. no messages have appeared and no functions have been called up from
the main menu, the screen saver appears in the display.

  MESSAGES     DETECTOR     MESS.TYPE         ACTIONS

Display:
In the clear text display, all existing messages, such as
intrusion, malfunction and switchoff, as well as notes re-
garding operation are displayed in the main menu.

1

INTRUS. INT

ZONE 0035 – 16

Storage room entrance 1st floor

2

INTRUS. INT

ZONE 0040 – 07

Offfice building south 1st floor

Summary of Contents for UEZ

















































Reviews:

No comments