English |
21
How it Works
The measuring tool checks the substrate of the sensor area
(6)
up to the
maximum detection depth.
Metal objects and live cables are automatically searched for during each
measurement.
Always move the measuring tool in a straight line in a
lateral direction over the substrate, applying light
pressure, without lifting it off or changing the pres-
sure. Hold the measuring tool by the gripping
surface
(1)
with an even grip and do not touch the
sensor area
(6)
while taking measurements.
Indicator light and
audio signal
Meaning
Green
+ silent
No object is within the sensor range
Yellow
+ silent
– Metal object near the sensor or
– Small or deep-lying metal object is within the
sensor range or
– Sensor interference due to the unfavourable
nature of the wall
Red
+ continuous
tone
Metal object is within the sensor range
Red flashing
+
pulsating sound
Live cable is within the sensor range
Objects are only displayed roughly the first time you move over them. Move
the measuring tool several times over the same surface in order to locate the
object precisely.
The detection depth of the measurement depends on material and size of
the objects, as well as material and condition of the substrate and may be
less than the maximum detection depth.
u
Before drilling, sawing or routing into walls, refer to other sources of
information to ensure that you eliminate hazards.
Since the measuring
Bosch Power Tools
1 609 92A 6H5 | (30.06.2021)
