Bosch TPA 300 User Manual Download Page 55

1699502721 | REV. A | MAY 2020

TPA 300 

 | User Guide | 

55

 | 

en-US

© Bosch Automotive Service Solutions Inc.

IMPORTANT: Do not continue until you have 

read this Software Product License Agreement 

(“Agreement”). 

By clicking the “I Accept” button (or authorizing 

any other person to do so), you accept this 

Agreement and are bound by its terms. If you 

are not sure that you are authorized by your 

employer to accept this Agreement, take this 

package to a principal in your firm before 

proceeding. This Agreement is a legal agreement 

between you and Bosch Automotive Service 

Solutions Inc. (“Bosch”). This Agreement 

governs your use of the software, associated 

media, printed materials and electronic 

documentation (collectively, “Software 

Product”) utilized with the Bosch TPA 300. 

Carefully read the terms and conditions of 

this Agreement before using this Software 

Product. Use of this Software Product indicates 

your acceptance of the following terms 

and conditions. IF YOU DO NOT AGREE TO 

THE TERMS OF THIS AGREEMENT, DO NOT 

DOWNLOAD, INSTALL OR USE THE PRODUCT 

SOFTWARE.

LICENSE.

 Subject to the terms and conditions 

of this Agreement, Bosch grants to you a 

personal, non-transferable (except as noted 

in Section 8 (Assignment)) and non-exclusive 

license (without the right to sub-license) to 

use the Software Product on a single tool at 

a time. This Agreement will also govern any 

Software Product updates, upgrades, and 

program additions for the Software Product 

which has been provided to you by Bosch, 

unless such upgrades, updates, or additions are 

accompanied by a separate agreement, in which 

case the terms of that agreement will govern. 

Bosch is not obligated to provide any updates, 

upgrades or program additions to the Software 

Product.

RESTRICTIONS.

 Without Bosch’s written 

permission, you shall not, and shall not permit 

anyone else to: (a) copy, distribute, sub-

license, sell, or otherwise provide any portion 

of the Software Product to any third party 

(including leasing, renting, letting on loan or 

sub-licensing); (b) modify, unbundle, translate, 

prepare derivative works of, disassemble 

(except to the extent that this restriction is 

expressly prohibited by law), reverse compile, 

decompile, or reverse engineer any part of 

the Software Product or otherwise attempt to 

learn the source code, structure or algorithms 

underlying the Software Product; (c) 

Software Product License

 Agreement

use the Software Product in a computer-based 

services business; (d) remove any proprietary 

notices or labels relating to the Software 

Product and will include such notices on any 

authorized copies of the Software Produce; (e) 

use the Software Product on more than one 

computer at the same time; or (f) separate the 

Software Product’s component parts for use 

on more than one computer. You agree that the 

Software Product belongs to Bosch and/or its 

suppliers. You agree to keep confidential and 

use your best efforts to prevent and protect 

the contents of the Software Product from 

unauthorized disclosure.

INTELLECTUAL PROPERTY.

 You acknowledge 

that no title to the intellectual property in 

the Software Product is transferred to you. 

You further acknowledge that all right, title 

and interest in and to the Software Product 

shall remain the property of Bosch and/or its 

suppliers, and you will not acquire any rights 

to the Software Product, except for the limited 

right to use as expressly set forth above. This 

includes all copies (to the extent permitted 

herein) of the Software Product made by you 

as well as the related user manuals and other 

supporting materials. The Software Product 

is protected by copyright laws, international 

copyright treaties, and other intellectual 

property laws and treaties. All trademarks 

appearing in the Software Product are the 

property of their respective owners.

CONSENT TO USE OF DATA.

 The Software 

Product does not collect any personally 

identifiable information on its own. You may 

wish to enter optional personally identifiable 

information.. All data generated by the 

Software Product may be used by Bosch and/

or its supplier for any purpose, including but 

not limited to, facilitating the provision of 

software updates, product support and other 

services related to the Software Product. You 

additionally agree that Bosch and/or its supplier 

shall have the right use the data generated 

by the Software Product, in aggregated and 

depersonalized form, for statistical, survey, 

product research, product development, and 

marketing purposes, and as part of such use, to 

make the aggregated and depersonalized data 

available to third parties for use by such third 

parties.

Through your use of the Software Product, 

Bosch may collect the following types of data: 

(a) registration data entered by you, including 

but not limited to company name and address; 

(b) technical data and related information, 

including 

Summary of Contents for TPA 300
































































Reviews: