en-US
|
4 6
| User Guide |
TPA 300
1699502721 | REV. A | MAY 2020
© Bosch Automotive Service Solutions Inc.
Low Battery Indication
The
TPMS Tool
incorporates a low battery
detection circuit. Battery life is an average
of 300 sensor tests per battery charge
(approximately 60 to 80 vehicles).
Miscellaneous
1
Tool Charging
Battery indicator status:
When low, icon is flashing, the tool
will turn off after 10 seconds.
DO NOT
use the tool with low battery status because the transmission and emission
may not be reliable.
Wall charger
USB B Cable
USB B Socket
For charging the tool, directly plug the supplied USB cable to the tool and plug the
wall charger to an appropriate outlet. The battery icon will change to reflect the
charging status:
Battery Replacement
Unscrew the two
screws on the back of
the tool.
Remove the cap.
Unplug the battery
and change the
battery to a new one.
Reinstall the cap and
the screws.
Recycle the used battery, see
Battery
and
Recycling
dedicated section in this
user manual
Summary of Contents for TPA 300
Page 1: ...TPA 300 User Guide en US ...