manualshive.com logo in svg

Bosch TCE 4540, Original Instructions Manual

The Bosch TCE 4540 Original Instructions Manual is a comprehensive guide that provides detailed information on operating, maintaining, and troubleshooting the Bosch TCE 4540 product. This manual can be easily downloaded for free from our website, allowing you to have access to the essential guide anytime, anywhere.

Share
Download
background image

1 695 105 790

2010-05-04

| 

Robert Bosch GmbH

Product description  |  TCE 4540  |  29

en

 

Bead pressing device, used for mounting of particu-
larly difficult tires. It is driven by an hydraulic pressu-
re cylinder.

3.5 

Description of unit

On the TCE 4540 there are rotating and mo-
ving parts that could injure fingers and arms.

652061-01_Mi

3

1

5

6

7

8

9 10 11

12

13

14

15

16

17

18

19

20

22

23

24

25

26

21

16a

16b

16c

16d

16e

16f

16g

16h

16i

2

4

Fig. 1: 

TCE 4540

Pos.

Name

Function

1

Tightening pin

Blocking of the rim on the tightening flange. It is posi-
tioned from above on the centre hole of the rim.

2

Tightening ring nut

Tightening of centring cone on the rim.

3

Centring cone

Centring of rim on tightening flange.

4

Tightening flange

Support and locks the rim safely (by means of the pneuma-
tic system) to make wheel rotation possible.

5

Dragging peg

Rotation of the wheel on the tightening flange. It is cen-
tred in one of the holes for the rim bolts.

6

Roller base

Placement of the wheel on the locking flange, after lif-
ting. Once locked, the wheel is lowered.

7

Wheel lifter

Lifting of the wheel from the floor to a safe working height and lowe-
ring of the wheel at the end of mounting and demounting operations.

3.6 

Description of function

Below are reported the main functions of the listed 
components of the TCE 4540:

 

Pedal box, includes the control pedals of the equip-
ment (tightening flange blocking/releasing pedal, 
tightening flange rotation pedal, wheel lifting pedal, 
tyre-inflating pedal).

 

Wheel lifter, lifts the wheel from the floor (with the 
help of the roller base) for positioning on the locking 
flange.

 

Tightening flange, locks (by means of the pneumatic 
system)

 

and rotates (clockwise and counter-clockwi-

se) the rim.

 

Bead breaking hydraulic unit, breaks the bead of the 
tire from the rim. It can even remove tires which are 
stuck in their seat in the rim.

 

Mounting tool, made of two parts (flat tool and cur-
ved tool) used for demounting and mounting of the 
tire from the rim.

Summary of Contents for TCE 4540

























Reviews:

No comments

Related manuals for TCE 4540

Brands by name

Popular brands

Load more brands