23
04/2010
en
b)
For a milder fl avour and a larger drink:
Start the brewing process by pressing
the start /stop button.
O
Automatic icon fl ashes. When the au-
tomatic brewing process is complete,
N
Manual icon lights up. If you press and
hold the start /stop button within 20 sec-
onds, you can extend the brewing proc-
ess to get your desired drink strength.
Your drink is now ready.
►
20 seconds after the end of each brewing
process, your TASSIMO machine returns
to stand-by mode.
►
Do not open the brewing unit before the
a
stand-by icon lights up. The T DISC
can then be removed. Now you can sit
back and enjoy your hot drink. If you
wish, you can prepare the next drink
immediately.
►
If you do not wish to prepare more drinks,
we recommend that you turn off your
TASSIMO machine using the on/off switch.
!
Note:
►
There may be short pauses during the
brewing process. This is so the drink
fl avour is optimised.
►
Do not remove the water tank during the
brewing process.
►
Always remove the used T DISC after
the brewing process. Be careful and hold
it by the fl ap because the T DISC is hot
after brewing your drink. When remov-
ing the T DISC, quickly fl ip it over so that
the printed side is face up to avoid any
dripping.
20 sec.
¡
Risk of scalding
–
Wait until the orange light lights up
before opening the brewing unit.
– Never open the brewing unit during
the brewing process.
– Please note that the beverages are
very hot when dispensed.
T DISC storage
T DISCs may be stored in their own pack-
aging or in other containers of your choice.
They should be stored in a cool, dry place.
It is not necessary to store T DISCs in
the refrigerator. Do not keep them in the
freezer. Provided the outer packaging is
intact, T DISCs may be used until the Best
Before date provided, which you can fi nd
in the gold bar on the side of the foil wrap
package.
2b
01_TAS 40_Heft1.indb 23
06.05.2010 09:53:55
