en
14
* depending on model
Additional options can be set with the
buttons
8
.
Ÿ
Express Wash/ Speed
Perfect *
The >>Express Wash/ Speed Perfect<<
function can reduce the running time by
approx. 20% to 50% depending on the
selected rinse programme. To obtain
optimum cleaning and drying results at a
reduced running time, water and energy
consumption are increased.
§
Half load *
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
“half load”. This will save water, energy
and time. It is recommended to put a little
less detergent in the detergent dispenser
than for a full load.
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to normal
conditions and the water hardness set
value 2. Different influencing factors such
as water temperature or mains pressure
may result in deviations.
Switching on the appliance
–
Turn on the tap fully.
–
Open the door.
–
Switch on the main switch
(
.
The display of the last selected
programme lights up. This programme
runs if no other programme button
`
is pressed.
–
Close the door.
The programme starts running.
End of programme
The programme has ended when
the programme end display
@
and
the display of the executed programme
are lit.
The end of the programme is also
indicated by an acoustic signal. This
function can be changed as follows:
–
Open the door.
–
Hold down programme button
3
and switch on the main switch
(
.
–
Release both buttons.
The programme button
3
flashes.
To change the setting:
–
Press programme button
3
. Each
time the Programme button
3
is pressed, the buzzing sound changes
in 4 stages (from off to loud).
–
Switch off main switch
(
, the set
value is saved.
–
Close the door.
Additional options
Washing the dishes
Downloaded from DishWasher-Manual.com Manuals
