background image

Tableware

 en

29

Damage to glass and table-
ware

Only put glasses and china in the
dishwasher if it is marked as dish-
washer-safe by the manufacturer.
Avoid damage to glass and table-
ware.

Cause

Recommendation

The following table-
ware is not dish-
washer-safe:

¡

Items of cutlery
and tableware
made from wood

¡

Decorated glass-
ware, antique and
hand-crafted table-
ware

¡

Plastic parts not
resistant to heat

¡

Tableware made
from copper or tin

¡

Tableware soiled
with ash, wax, lub-
ricating grease or
paint

¡

Very small items of
tableware

Only put tableware in
the dishwasher if it is
marked as dish-
washer-safe by the
manufacturer.

The chemical com-
position of detergent
causes damage.

Use a detergent
marked by the manu-
facturer as gentle on
tableware.

Highly caustic alkaline
or highly acidic clean-
ing solutions, in partic-
ular commercial or in-
dustrial cleaners, are
not safe to use in the
dishwasher with alu-
minium.

If you are using highly
caustic alkaline or
highly acidic cleaning
agents, in particular
commercial or indus-
trial cleaning agents,
do not put aluminium
parts in the dish-
washer interior.

Cause

Recommendation

The water temperat-
ure of the programme
is too high.

Select a programme
with lower temperat-
ures.
After the programme
has ended, take glass-
ware and cutlery out
of the appliance
without delay.

Arrange tableware

Arrange tableware correctly to optim-
ise the dishwashing result and pre-
vent damage to both the appliance
and tableware.

Tips

¡

Using the appliance allows you to
save energy and water compared
to washing-up by hand.

¡

See our website for examples of
how to load your appliance effi-
ciently, free of charge.

¡

To save energy and water, load
the machine with the number of
place settings specified (standard
load with tableware and cutlery). 
→ 

"Technical specifications",

Page 56

¡

For better washing and drying res-
ults, position items with curves or
recesses at an angle so water can
run off.

1.

Remove large remnants of food
from tableware.

Summary of Contents for SPS2HKW57E





























































Reviews: