manualshive.com logo in svg

Bosch SOLUTION 6000, User Manual

Share
Download
Bosch SOLUTION 6000 User Manual Download Page 42

Solution 6000

42

Bosch Security Systems   12/14   BLCC610U

User Guide

 

The keypad will scroll all zones that you can test.

To test zone Zn1

open then close

Zone 1 Name

Press OK or MENU

To test zone Zn2

open then close

Zone 1 Name

Press OK or MENU

3.  Open and close each zone that needs to be tested.  

A zone that has been successfully tested will no 

longer scroll on the keypad display.

 

When all zones have been tested, the keypad will 

display:

All zones have been

successfully tested

Press OK or MENU

4.  Press [OK] to save and exit, or press [MENU] to exit 

without saving. 

System > System Testing >

Battery Test

MENU  7-9-1

This menu allows you to manually test the systems back 

up battery.  The system will automatically test the battery 

every four hours and every time the system is armed.
The battery test can take up to two minutes to complete 

and the keypad will display the voltage of the battery 

during the test.
Enter programming mode (PIN + MENU) then,

1.  Press [MENU] + [7] + [9] + [1].
 

The keypad will display current voltage whilst under 

test:

Battery test in progress.

Please wait..

    Voltage = 13.4V

To Go Back Press OK

 

If the battery has passed the test, the keypad will 

display:

Battery Test Passed

Press OK To Continue

To Go Back Press OK

 

If the battery has failed the test, the keypad will 

display:

Battery Test Failed

Please Call For Service

To Go Back Press OK

2.  Press [OK] to exit.

Summary of Contents for SOLUTION 6000

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands