Bosch SMV6ZCX42N, Instructions Manual

Page: 55 / 68

Troubleshooting NL
Malfunction
Cause To fix an issue
There are wipeable or
water-soluble deposits
in the interior or on the
door of the appliance.
White deposits form
inside the appliance.
1.
Set the water softener correctly.
In most cases you will need to
increase the setting.
2.
Change the detergent if
necessary.
The softening salt
reservoir is not closed.
▶
Turn the softening salt container
closed.
There is white, hard-to-
remove deposits on the
dishes or on the interior
or door of the appliance.
Components of the
detergent are
deposited. This deposit
usually cannot be
removed chemically.
▶
Change from "dishwasher detergent"
→
Page 32.
▶
Clean the device mechanically.
Water hardness is set
incorrectly or water hardness
is higher than 50 °dH
(8.9 mmol/l).
▶
Set the water softening to the
water hardness or top up with
softening salt.
3in1 detergent,
biodetergent or eco-
detergent is
insufficiently effective.
▶
Set the water softening to the
water hardness and use
separate agents (quality
cleaning agent, softening
salt, rinse aid).
Detergent is dosed
too low.
▶
Increase the dose of the dishwashing
detergent or change "dishwasher
detergent"
→ Page 32.
Washing program too weak
chosen.
▶
Select a more powerful rinse program
mom.
→ "Programs", Page 21
▶
Adjust the sensitivity of the sensor
system on.
→
"Sensors", Page 14
Tea or lipstick residue
on the dishes.
Washing temperature is too low.
▶
Select a program with a high
re wash temperature.
→
"Programs", Page 21
Dishwasher detergent has been
dosed too low or is unsuitable.
▶
Use a suitable "dishwasher detergent"
share" → Page 32 and dose it
according to the manufacturer's
instructions.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
▶
Only remove coarse food residues
and do not pre-rinse the dishes.
55