aus
Home Connect
34
Basic setting
Display text
Selection
Description
Tone volume
b02
1
b00 - b03
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Wi-Fi
Cn0
1
Cn0 - Cn1
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Remote Start
rc1
1
rc0 - rc2
Activate or deactivate
.
The following settings are possible:
¡
With the setting "rc0", the func-
tion is permanently deactivated.
¡
With the setting "rc1", the func-
tion can be selected via the
button.
¡
With the setting "rc2", the func-
tion is permanently activated.
Factory setting
rE
Start with
YES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Open the appliance door.
2.
Press .
3.
To open the basic settings, press
for 3 seconds.
a
The display shows
.
4.
Press
repeatedly until
the display shows the required set-
ting.
5.
Press
repeatedly until the dis-
play shows the right value.
You can change several settings.
6.
To save the settings, press
for 3 seconds.
7.
Close the appliance door.
Home Connect
Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
