Basic settings
aus
33
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Display text
Selection
Description
Rinse aid dispensing
r05
1
r00 - r06
Set the amount of rinse aid to be dis-
pensed.
"Setting the amount of rinse aid",
Switch the rinse aid system off with
level r00.
Intensive drying
d00
1
d00 - d01
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note:
Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Hot water
A00
1
A00 - A01
Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A01" or off
"A00".
InfoLight
I01
1
I00 - I01
Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the
floor below the appliance door. This
light will not be visible if the appli-
ance is installed at eye level with the
cabinet front fitted flush. If the appli-
ance door is not completely closed,
the spot of light will flash. The pro-
gramme has ended when the spot of
light is no longer visible on the floor.
Level "I00" switches InfoLightoff.
1
Factory setting (may vary according to model)
