Bosch SMS6HAI02A User Manual Download Page 48

Page: 48 / 56

aus

Troubleshooting

Fault

Cause and troubleshooting

Connection to home
network is not estab-
lished.

WLAN on router is not active.

▶

Check the wireless network connection of your
router.

WLAN display is flash-
ing.

Connection to home network is not available.

▶

Activate the wireless network connection on your
router.

Home Connect cannot
be implemented cor-
rectly.

Home Connect set incorrectly.

▶

Please consult the documents supplied for
Home Connect.

Technical fault is present.

▶

Please consult the information about support in the
documents supplied for Home Connect.

Fault

Cause and troubleshooting

Refill indicator for
rinse aid lights up.

Insufficient rinse aid.

Add Rinse aid →

Page 24

Set the amount of rinse aid to be dispensed.
→

"Setting the amount of rinse aid", Page 25

Refill indicator for
rinse aid does not
light up.

Rinse aid system is switched off.

▶

Set the amount of rinse aid to be dispensed.

Fault

Cause and troubleshooting

Water is left in the ap-
pliance at the end of
the programme.

Filter system or area under the filters is blocked.

Clean the Filters →

Page 38

Clean the Wastewater pump →

Page 51

Programme has not yet ended.

▶

Wait until the programme ends or cancel the pro-
gramme with

Reset

▶

→

"Terminate programme", Page 31

Appliance cannot be
switched on or oper-
ated.

Software update is taking place.

▶

Wait until the software update has finished.

Appliance functions have failed.

Pull out the mains plug or switch off the fuse.

Wait at least 2 minutes.

Connect the appliance to the power supply.

Switch the appliance on.

Appliance does not
start.

The mains fuse has tripped.

▶

Check the relevant fuse.

Mains cable is not inserted.

Summary of Contents for SMS6HAI02A

























































Search results

Summary of Contents for SMS6HAI02A

Reviews:

Related manuals for SMS6HAI02A

Brands by name

Popular brands

Bosch SMS6HAI02A, User Manual

Search results

Summary of Contents for SMS6HAI02A

Reviews:

Related manuals for SMS6HAI02A

Brands by name

Popular brands