en
Basic settings
38
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Display text
Selection
Description
Water hardness
H:04
1
H:00 - H:07
Set the water softening system to
your water hardness.
"Setting the water softening sys-
Level H:00 switches the water
softening system off.
Rinse aid dispensing
r:05
1
r:00 - r:06
Set the amount of rinse aid to be dis-
pensed.
"Setting the amount of rinse aid",
Switch the rinse aid system off with
level r:00.
Sensor setting
SE:00
1
SE:00 - SE:02
Set the water sensor for identifying
soiling.
Extra Dry
d:00
1
d:00 - d:01
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note:
Not suitable for delicate items
of tableware.
Switch Extra Dry on "d:01" or off
"d:00".
Start programme
SP:01
1
SP:00 - SP:01
Set a default programme for when
the appliance is switched on.
¡
With the setting "SP:00", the last
programme selected is set by de-
fault when the appliance is
switched on.
¡
With the setting "SP:01", the Eco
50° programme is set by default
when the appliance is switched
on.
1
Factory setting (may vary according to model)