Softening SystemNL
3.
Approx. 3 seconds on
to access the basic settings.
Busy-
1.
Open the lid of the softening salt
reservoir and remove it.
aThe display shows Hxx. aThe
display shows
2.
When using for the first time: fill the
reservoir completely with water.
reflected
to give.
3. Note:Only use dishwasher
softening salt.
Do not use salt tablets. Do not
use table salt.
4.
Just as often on
the desired water hardness has
been set.
press until
The factory setting is H04.
5.
To save the settings, press . for
about 3 seconds
to press.
Place the softening salt in the
softening salt reservoir.
Softening salt
You can soften the water with
softening salt.
Filling softening salt
If the Refill softener salt indicator
lights up, top up the softener salt in
the softener salt reservoir immediately
before the program starts. The
consumption of softening salt
depends on the degree of water
hardness. The higher the water
hardness level, the higher the
consumption of softening salt.
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
4.
Fit and close the lid of the
reservoir.
PAY ATTENTION!
†Dishwasher detergent can damage the water
damage hardening.
▶
Only fill the water softener
reservoir with dishwasher
softening salt.
†The rinse aid container can be
softening salt for dishwashers
corrode.
▶
To ensure that spilled
softening salt is flushed from
the rinse aid container, the
softener must be
salt immediately before the start of the
t reservoir for
be filled.
Switch off water softening
If the refilling salt indicator bothers
you, for example if you use a
combined dishwasher detergent with
a salt component, you can switch off
the softening salt indicator.
Remark
To avoid damage to the
appliance, only switch off the
water softening in the following
cases:
†The water hardness is maximum
times 21 °dH and you use a
combined dishwasher detergent
with salt substitutes. combined
program in he
softening salt
25
