Bosch SKS68BB008 User Manual Download Page 7

Page: 7 / 56

Safety

WARNING ‒ Risk of tipping!

Overfilling the Baskets may cause the appliance to tip up.

▶

Never overfill the Baskets with free-standing appliances.

WARNING ‒ Risk of electric shock!

An ingress of moisture can cause an electric shock.

▶

Only use the appliance in enclosed spaces.

▶

Never expose the appliance to intense heat or humidity.

▶

Do not use steam- or high-pressure cleaners to clean the appli-
ance.

If the insulation of the power cord is damaged, this is dangerous.

▶

Never let the power cord come into contact with hot appliance
parts or heat sources.

▶

Never let the power cord come into contact with sharp points or
edges.

▶

Never kink, crush or modify the power cord.

1.6 Damaged appliance

WARNING ‒ Risk of electric shock!

If the appliance or the power cord is damaged, this is dangerous.

▶

Never operate a damaged appliance.

▶

Never operate an appliance with a cracked or fractured surface.

▶

Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains.

▶

If the appliance or the power cord is damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and
turn off the water tap.

▶

Call customer services. →

Page 53

Incorrect repairs are dangerous.

▶

Repairs to the appliance should only be carried out by trained
specialist staff.

▶

Only use genuine spare parts when repairing the appliance.

▶

If the power cord of this appliance is damaged, it must be re-
placed with a special connection cable, which is available from
the manufacturer or his Customer Service.

Summary of Contents for SKS68BB008

























































Search results

Summary of Contents for SKS68BB008

Reviews:

Related manuals for SKS68BB008

Brands by name

Popular brands

Bosch SKS68BB008, User Manual

Search results

Summary of Contents for SKS68BB008

Reviews:

Related manuals for SKS68BB008

Brands by name

Popular brands