Bosch SKS68BB008, User Manual

Page: 35 / 56

Basic settings
en
35
Basic setting Display text Selection Description
Hot water A:00
1
A:00 - A:01 Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this
can be prepared with little
energy and a suitable install-
ation is available, e.g. solar
heating system with circula-
tion line. The water temperat-
ure should be at least 40 °C
and max. 60 °C.
Switch hot water on "A:01"
or off "A:00".
Start programme SP:01
1
SP:00 - SP:01 Set a default programme for
when the appliance is
switched on.
¡
With the setting "SP:00",
the last programme selec-
ted is set by default when
the appliance is switched
on.
¡
With the setting "SP:01",
the Eco 50° programme
is set by default when the
appliance is switched on.
Tone volume SL:02
1
SL:00 -SL:03 Adjustment of tone volume.
When you switch the appli-
ance on or off, a signal tone
sounds.
Level "SL:00" switches the
signal tone off.
Button volume bl:02
1
bl:00 - bl:03 Set the button volume during
operation. Level "bl:00"
switches the button tones
off.
Factory setting rE Start with
Y:ES
Confirm with Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
16.2 Changing basic settings
1.
Press ⁠.
2.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a
The display shows ⁠.
3.
Press repeatedly until the
display shows the required setting.