Preventing material damage
en-us
9
Preventing material damage
2 Preventing material
damage
Preventing material damage
NOTICE:
Harsh chemicals such as bleach-
based products can damage your
dishwasher.
▶
Do not use harsh chemicals
such as bleach-based products
to clean your dishwasher.
Unsuitable cleaning products may
damage the appliance.
▶
Do not use a steam cleaner.
▶
So as not to scratch the finish
on the appliance, do not use
sponges with a rough surface
or abrasive cleaning agents.
Escaping water vapor can dam-
age cabinetry.
▶
When the program ends, let the
appliance cool down a bit be-
fore opening the door.
Protect your appliance from the
elements.
▶
Protect against freezing to
avoid possible damage to the
fill valve. Damage caused by
freezing is not covered by the
warranty.
Special salt for dishwashers can
damage the tub due to corrosion.
▶
To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the pro-
gram starts.
Detergent may damage the water
softening system.
▶
Only fill the dispenser of the
water softening system with
special dishwasher salt.
Environmental protection and energy-saving
3 Environmental
protection and
energy-saving
Environmental protection and energy-saving
3.1 Saving energy
If you follow these instructions,
your appliance will use less power
and water.
Use the Normal program.
a
The Normal program is energy-
efficient and environmentally
friendly.
If you do not have much dishware
to wash, use the additional Half
Load option.
1
a
The program will adjust to a
lower load and consumption
will be reduced.
Change the sensor setting to the
default.
a
Consumption is reduced.
Zeolith drying automatically helps
to save energy.
a
3.2 Zeolith drying
The appliance features a Zeolith
container. Zeolith drying lets you
save energy.
Zeolite is a mineral that can store
moisture and energy and then re-
lease them again.
During dishwashing energy is
used to heat up the washing water
and dry the mineral.
1
Depending on the appliance specifications