en-us
Environmental protection and energy-saving
10
During the drying phase, moisture
from the interior of the dishwasher
is stored in the mineral and heat is
released. The heat is blown out
into the interior of the dishwasher
with dry air. This speeds up and
improves drying.
Therefore, zeolith drying is very
efficient.
Note: To avoid impairing Zeolith
drying performance, do not posi-
tion dishware parts directly in front
of the intake opening or the blow
opening of the Zeolith container.
Do not position heat-sensitive
dishware parts directly in front of
the blow opening of the Zeolith
container.
3.3 AquaSensor
The AquaSensor is an optical
measuring device (light barrier)
which measures the turbidity of
the washing water. You can save
water with the AquaSensor.
The operation of the AquaSensor
depends on the selected cycle. If
the soiling level is high, the wash-
ing water is drained off and re-
placed with fresh water. If the soil-
ing level is lower, the washing wa-
ter is used in the next rinse, so re-
ducing water consumption by 3-6
liters. In the Auto cycles the tem-
perature and run time are addi-
tionally adjusted to the level of
soiling.
3.4 Sensors
The sensors adjust the cycle se-
quence and strength in the Auto
cycles depending on the level and
type of soiling.
The sensor has different sensitiv-
ity levels that can be changed in
the basic settings.
Sensor set-
ting
Description
SE:00
Optimal setting for
mixed loads and
heavily soiled dish-
ware. Saves both
energy and water.
SE:01
Adjusts the cycle
strength for effec-
tive removal of
food remnants
even with low soil-
ing levels. Energy
and water con-
sumption are ad-
justed accordingly.
SE:02
Adjusts the cycle
strength for difficult
conditions of use,
e.g. stubborn
dried-on food rem-
nants. Recom-
mended setting
when using or-
ganic or ecological
detergents con-
taining low levels
of active agents.
Energy and water
consumption are
adjusted accord-
ingly.
