en-us
Troubleshooting
42
--------
Noise from
dishes rattling
or water strik-
ing tub walls.
Dishes weren’t loaded properly,
allowing dishes to hit each other or
spray arms.
Load dishes properly into racks.
"Loading the Dishwasher" on page 15
Light dishes or lightly loaded racks
allow dishes to move or water
sprays to strike tubs.
Load more dishes or distribute dishes more
evenly/securely in the dishwasher.
Water leaks
from tub or
from around
door.
Suds from using the wrong deter-
gent (i.e. dish) or overfilling/spilling
rinse aid.
Use an appropriate dishwasher detergent,
don’t overfill rinse aid and clean any spilled
rinse aid. If suds still persist, add one table-
spoon of vegetable oil and run the desired
cycle.
Door seal was misaligned or pulled
from its track.
Make sure the door seal is securely inserted
into its track.
Condensation vent is blocked.
Clean out vent and move tall items like trays
away from the vent.
Improper installation.
Have an authorized service professional
remount the dishwasher.
White limes-
cale on dishes,
tub, racks or
door.
White residue coats dishwasher
interior and racks wheels squeak
from lime scale deposits in hard
water.
Use a dishwasher cleaner every few
months. If dishwasher has a water softener,
increase the setting.
Hard water kept 3 in 1 detergent or
Eco detergent from being effective.
Use separate dishwasher detergent, rinse
aid and dishwasher softener salt (if dish-
washer has a softener).
Under dosing of detergent.
Use more detergent or change to a more
effective detergent.
Rinse temperature is too low.
Select more intensive wash cycles with
higher washing temperatures.
Detergent dis-
penser cover
will not shut
Cover guides are blocked by sticky
detergent residue.
Remove detergent residue.
Unable to
select desired
cycle
Previous cycle not finished.
Summary of Contents for SHVM4AYB3N
Page 2: ...2 ...
