Bosch SHV2ITX22E User Manual Download

Page: 38 / 56

NL Troubleshooting

Troubleshooting

fix disruptions

You can remedy minor faults on the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.

fix disruptions

WARNING

Risk of electric shock!

Improper repairs are dangerous.

▶

Only qualified personnel may carry out repairs on the device

to carry out.

▶

Only original spare parts may be used for repair

ration of the device.

▶

If the power cord of this appliance is damaged, it must be replaced

caught by a special cord available from the manufacturer or service

deputy service.

Error code / error indication / signal

Malfunction

Cause

Troubleshooting

Water supply

indicator lit

Water inlet hose is

kinked.

▶

Lay the water inlet hose

of kinks.

Tap is closed.

▶

Turn on the tap.

Tap is clogged or calcified.

▶

Turn on the tap. The sieves

in the water connection

Switch off the device.

inlet or AquaStop

hose are clogged.

Remove the plug from the socket.

Turn off the tap.

Unscrew the water connection.

Remove the strainer from the inlet hose

Clean the strainer.

Place the strainer in the supply hose.

Screw on the water connection.

Check the water connection for

leaks.

Summary of Contents for SHV2ITX22E

























































Search results

Summary of Contents for SHV2ITX22E

Reviews:

Related manuals for SHV2ITX22E

Brands by name

Popular brands

Bosch SHV2ITX22E, User Manual

Search results

Summary of Contents for SHV2ITX22E

Reviews:

Related manuals for SHV2ITX22E

Brands by name

Popular brands