12
>150 mm
adjust
S
min. 70 mm
max. 150 mm
Center the dishwasher in the opening before securing it to
your cabinet or countertop as shown in
Figure 20
. Use the
supplied emergency release tools (R) to open the appliance
as shown in
Figure 21
. Remove the top cutlery rack as
shown in
Figure 22
.
When installing a heavy wooden door panel, adjust as shown
in
Figure 26
.
LEVELING THE DISHWASHER
SECURING THE DISHWASHER
For Top Mount - Wooden Countertop
For Side Mount - Stone Countertop
Avoid Tip Over Hazard!
Do not use the dishwasher until it is completely
installed. When opening the door on an uninstalled
dishwasher, carefully open the door while
supporting the rear of the unit. Failure to follow
this warning can result in serious injury.
WARNING
Figure 19
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
1
/
16
″ (2mm)
The unit should now be ready to slide into the cabinet
opening. To avoid scratching the floor, use floor protection and
caution when sliding the dishwasher into the cabinet. Make
sure that the hoses and cords do not bunch up behind the
unit or kink as you slide the unit back. Make certain to slide
the unit into place before raising the leg levelers.
Level the dishwasher horizontally by turning feet clockwise
to raise or counter-clockwise to lower front of the unit.
Level the dishwasher vertically by turning center screw to
raise or lower the back.
Drive the mounting screws through the holes in the mounting
brackets as shown for Top Mount (
Figure 23
), Side Mount
(
Figure 24
), and Alternative Side Mount (
Figure 25
).
For Alternate Side Mount
Figure 25
Figure 26
N
D
~
1
/
2
″ (12mm)
12
1
/
16
D
~½" (13 mm)
(2 mm)
R
R
