Bosch SHE7PT52UC/01, Operating Instructions Manual

Page: 22 / 64

19
Language (model dependent)
To change the language of the display following these instructions.
1
Open the door and press the [On/Off] button.
2 Hold down the “ A ” button (see page 17) and press [Start] until the
display indicates “ d:00 ”.
3 Release both buttons. Press the “ A ” button until the display shows “ L:01 ”.
4 Press the “ C ” button until the display corresponds with your
requirements.
L:01 = English
L:03 = French
L:07 = Spanish
5 Press [Start] to save and close the door.
InfoLight® (model dependent)
A LED illuminates the floor to indicate the unit is running. If the appli-
ance is installed at eye-level, the LED is not visible.
To change the setting:
1
Open the door and press the [On/Off] button.
2 Hold down the “ A ” button (see page 17) and press [ Start ] until the
display indicates “ d:00 ”. Release both buttons.
3 Press the “ A ” button until the display shows “ 1:01 ”.
4 Press the “ C ” button to switch between “ 1:01 ” = ON and “ 1:00 ”
=OFF, press [ Start ] to save, and close the door.
Time Light® (model dependent)
Our dishwashers offer a convenient time remaining indicator light that
projects cycle status and time remaining on the kitchen floor.
Note: If the appliance is installed at eye-level, the time remaining informa-
tion is not visible.
In the default setting (S:01) the time remaining shows on the floor
alternating with the Bosch® logo (about 5 seconds per image).
To change setting:
1
Press the [On/Off] button.
2 Hold down the “ A ” button (see page 17) and press [Start] until the
display indicates “ d:00 ”.
3 Release both buttons. Press the “ A ” button until the display shows “ S:01 ”.
4 Press the “ C ” button to switch between “ S:00 ” = OFF, “ S:01 ” and
“ S:02 ” = Time Light ON
5 Press [Start] to save the setting.