background image

en 

Cleaning and servicing

34

Changing basic settings

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows Hxx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the required set-
ting.

4.

Press 

 repeatedly until the dis-

play shows the right value.
You can change several settings.

5.

To save the settings, press

 for 3 seconds.

Cleaning and servicing

Cleaning and servicing

Cleaning and servicing

To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.

Cleaning the tub

WARNING

Risk of harm to health!

Using detergents containing chlorine
may result in harm to health.

Never use detergents containing
chlorine.

1.

Remove any coarse soiling in the
interior with a damp cloth.

2.

Add detergent to the detergent dis-
penser.

3.

Select the programme with the
highest temperature.
→ 

"Programmes", Page 17

4.

"Start the programme without
tableware." → 

Page 31

Cleaning products

Only use suitable cleaning products
to clean your appliance.
→ 

"Safe use", Page 10

Tip: 

You can get our tested and ap-

proved Dishwasher Care and Ma-
chine Cleaner for Dishwashers online
at https://www.bosch-home.com/
store  or from customer service.

Tips on appliance care

Follow the tips on appliance care to
make sure your appliance functions
properly at all times.

Action

Benefit

Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.

This ensures the parts
of the appliance will
remain clean and hy-
gienic.

If the appliance is not
going to be used for a
while, leave the door
slightly ajar.

This will prevent un-
pleasant odours.

Machine Care 

Deposits, e.g. from remnants of food
and limescale, can cause your appli-
ance to malfunction. To avoid such

faults and reduce odours, we recom-
mend cleaning your appliance at reg-
ular intervals.
Machine Care combined with ma-
chine care products and machine
cleaners is the right programme for
the care of your appliance.

Summary of Contents for SGS4HVW31E

























































Reviews: