NL Troubleshooting
Malfunction
Cause
Troubleshooting
Plastic crockery is not No fault. Due to a bearing
heat storage capacity
dries plastic worse.
▶
No solution available.
dry.
Cutlery is not dry.
Cutlery is not properly
placed in the cutlery basket
or drawer.
Drops may form at the touch
points of the cutlery.
1. "
If possible, arrange the cutlery separately
2.
Avoid touch points.
Insides of the appliance
are wet after the wash
cycle.
No malfunction. For
condensation drying, water
droplets in the rinse aid
No action required. No action
required.
hold the reservoir necessary
and desired. The moisture in
the air condenses on the
inner walls of the appliance,
flows downwards and is
pumped out.
Food remains on the
crockery.
Crockery is placed too
close together or the
basket is too full.
1.
Arrange the crockery with sufficient
space between them.
The spray jets must be able to
reach the surface of the
dishes.
2.
Avoid touch points.
Spray arms cannot
rotate freely.
▶
Arrange the crockery in such a way that it
dishes do not interfere with the
rotation of the spray arm.
Spray arm nozzles are
clogged.
▶
Clean the "spray arms"
The seven are polluted.
▶
Clean the sieves.
The strainers are incorrectly
fitted and/or not secured.
1.
Apply the sieves properly.
2.
Secure the seven.
Washing program too weak
chosen.
▶
Select a more powerful rinse program
mom.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
▶
Only remove coarse food residues
and do not pre-rinse the dishes.
40
