17
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from
P:00
to
P:02
.
To change the setting:
1
Press the
[On/Off]
button.
2
Hold down the
“A”
button (see page 15) and press
[Start]
until the display indicates
“H:0x”
(x can
be any number).
3
Release both buttons.
4
Press the
“A”
button until the display indicates
“P:0x”
.
5
Press the
“C”
button until the display corresponds with your requirements.
P:00
= dishwasher does not turn off automatically
P:01
= dishwasher turns off automatically after 1 minute
P:02
= dishwasher turns off automatically after 120 minutes (2 hours)
6
Press
[Start]
to save the setting.
Child Lock
1
Start the desired cycle.
2
Hold down the
“B”
button (see page 15) for approximately 3 seconds until the display reads “
CL
”.
3
The “
CL
” will be indicated now if any button is pressed and the program will not be reset.
To deactivate the child lock, hold down the
“B”
button for approximately 3 seconds until the display no
longer reads “
CL
”.
Aquastop® Leak Protection
Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps
out water to avoid contact with the floor. It works 24/7 and can turn itself on.
