Notes for Maintenance and Service
34
Loss of Keys
x
The following steps are required if the keys were read in
during programming
:
1. Bypass the key using the control panel keypad or erase the key using the appropriate pro-
gramming program (e.g. WinPara or NzPara)
2. Order a new key
- see chapter "Ordering Additional Keys"
x
The following steps are required if the keys were read in
directly via the reader
:
1. For security reasons, erase all remaining keys and the individual customer code, i.e. restore
the default settings
- see chapter "Restoring the Default Settings"
2. Read in the security card or standard key and all the remaining keys from scratch
- see chapter "Reading In Keys and Programming the System"
3. Order a new key.
- see chapter "Ordering Additional Keys"
