NL Water softening
4.
Release key.
5.
Turn the program selector until
the display shows H:00.
a
6.
on
press to save the setting.
a The water softener has been
switched on and the refilling salt
indicator is deactivated.
Regeneration of the
softening system
Funnel
1
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
In order to maintain trouble-free
operation of the softening system,
the device regularly performs a
regeneration of the softening system.
The softening system is regenerated
in all programs before the end of the
main wash cycle. This increases the
running time and the consumption
values of, for example, water and
electricity.
4.
Fit and close the lid of the
reservoir.
Switch off water softening
Note
To avoid damage to the appliance,
only switch off the water softening
in the following cases:
s
The water hardness is a maximum
of 21 °dH and you use a combined
dishwasher detergent with salt
substitutes. According to the
manufacturer's instructions,
combined dishwasher detergents
with salt substitutes can only be
used up to a degree of hardness of
21 °dH without adding softening
salt.
The water hardness is 0 - 6 °dH.
You do not need to use softening
salt.
s
1.
2.
Press.
press and hold.
3.
Turn the program selector until the
display shows H:04.
1
Depending on the device version
30