English |
7
Bosch Power Tools
F 016 L81 157 | (30.9.14)
Declaration of Conformity
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
29.09.2014
Mounting and Operation
Troubleshooting
3 600 ...
HA4 1..
HA4 2..
HA4 3..
We declare under our sole responsibility that the product described under
“Technical data” is in conformity with all relevant provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC, 2000/14/EC including their
amendments and complies with the following standards:
EN 60335-1, EN 60335-2-77.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex VI.
dB(A)
94
94
95
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Page
Delivery Scope
1
9
Handle Assembly
2
10
Snap together the Grassbox
3
10
Grassbox fitting/removing
3
11
Adjusting the Cutting Height
4
11
Starting
5
11–12
Working Advice
5
11–12
Stopping
5
11–12
Working Advice
6
13
Blade Maintenance
7
13
Selecting Accessories
8
14
STOP
Problem
Possible Cause
Corrective Action
Motor refuses to start
Power turned off
Turn power on
Mains socket faulty
Use another socket
Extension cable damaged
Inspect cable, replace if damaged
Fuse faulty/blown
Replace fuse
Grass too long
Increase height of cut and tilt garden product to reduce starting
load
Motor protector has activated
Allow motor to cool and increase height of cut
Machine functions
intermittently
Extension cable damaged
Inspect cable, replace if damaged
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated
Allow motor to cool and increase height of cut
Machine leaves ragged
finish
and/or
Motor labours
Height of cut too low
Increase height of cut
Cutting blade blunt
Replace the blade
Possible clogging
Check underneath the garden product and clear out as neces-
sary (always wear protective gloves)
Blade fitted upside down
Refit blade correctly
OBJ_BUCH-2011-004.book Page 7 Tuesday, September 30, 2014 8:26 AM
