Standard
Meaning
EN ISO 13849-1:2008
Safety of machinery – safety-related parts of control systems
– part 1: General principles for design
EN 60204-1:2006 (chapter 9, chapter
10)
Safety of machinery – electrical equipment of machines –
part 1: General requirements
Examination of the conformity regarding the EMC Directive
EN 61131-2:2007 (chapter 8, chapter
9)
Programmable logic controls
– part 2: Equipment requirements and tests
In this way the accordance to following standards is also given:
EN 61000-6-2:2006
EMC generic standards – noise immunity for industrial envi-
ronments
EN 61000-6-4:2007
EMC generic standards - emission standard for industrial en-
vironments
General procedures and safety principles
EN ISO 12100:2010
Safety of machinery – General principles for design – Risk as-
sessment and risk reduction
Stability and impermeability of the enclosure
EN 60529:1991
Degrees of protection provided by enclosures
Electrical safety and fire protection
EN 50178:1997
Electronic equipment for use in power installations
UL examination for industrial control equipment
UL 508, 17
th
edition (=CSA C22.2 No.
14)
Industrial Control Equipment (NRAQ, NRAQ7)
UL examination for robotic applications
UL 508, 17
th
edition (=CSA C22.2 No.
14)
Industrial Control Equipment (NRAQ, NRAQ7)
UL 1740, 2007
(1998) Industrial Robots and Robotic Equipment E216950
(TETZ2, TETZ8)
Tab. 8-2: Standards
8.3 EC-Type Examination Certificate
A type examination was carried out by the certification body NSBIV AG SIBE
Switzerland, Iseliquai 8, 6005 Lucerne, Switzerland.
Bosch Rexroth AG
Standards
VCH 05.1
10/27
DOK-SUPPL*-VCH*05*****-IT02-EN-P
