4
/18
Load-sensing control block SB11
| About this documentation
Bosch Rexroth AG, RE 66177-10-R/2021-11-16
1 About this documentation
1�1 Validity of the documentation
This documentation applies to load-sensing control blocks SB11 of Bosch Rexroth
including the following control block segments:
• Connecting plate, end plate
• Control valves SB11-EHS4
• Hitch control valves EHR11-EHS4
▶ Read this documentation completely and, in particular, the chapter 2
"Safety instructions" and the chapter 3 "General instructions on property and
product damage" in the related instruction manual 66177-B before you start
working with the product.
1�2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the
book symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title
Document number
Document type
Load-sensing control block SB11
Contains important information on the safe and proper transport, installation,
commissioning, maintenance and removal of the SB11 control block.
66177-B
Instruction manual
Technical data sheet
Contains the permissible technical data.
Please bear in mind that different technical data sheets apply depending
on the version:
Data sheet
Load-sensing control block SB11
66177
Load-sensing directional valves in sandwich plate design SB11-EHS4
66176
Plates for load-sensing control block in sandwich plate design SB11
66181
Hitch control valves EHR
66126
For related documentation on the assembly and repair, please refer to the
above-mentioned manual and, if necessary, to
www.boschrexroth.com/mobile-hydraulics-catalog
.
