Bosch Rexroth PST 6 0 Series, Operating Instructions Manual

Page: 265 / 330

1070080029 / 05 Bosch Rexroth AG Electric Drives
and Controls
PST 6xx0 | | 265 /330
Assembly
7.2.4 Connection for programming terminal
Point-to-point connection of the programming terminal (PC/laptop
computer with BOS software for administration, diagnosis, archiving,
backup).
The optional Ethernet module can be used for networking, refer to
page 216.
X1 (V24/RS232 interface, sub D)
Connection: at X1; sub D, 9-pole, male connector
Cable length: max. 20 m (with recommended cable type)
Cable type: shielded, core area min. 0.2 mm
2
,
capacitance max. 2.5 nF
(e.g.: 3 x 2 x 0.2 mm
2
LifYCY, Metrofunk)
Transmission rate: 19200 bit/sec
Parameters: 8E1 (8 data bits, even parity, 1 stop bit)
1
2
3
RX
TX
4
X1
Screen continuity through large-area connection to metal housing of the plug connection.
5
GND
6
7
8
9
PC (COM1 or COM2)
RX
TX
GND
2
3
4
5
Male connector
Male connector
Fig.33: Connection of programming terminal via X1
For suitable connecting cables, please refer to Section 13.1 on
page 305.
ENGLISH