Bosch Rexroth PST 6 0 Series, Operating Instructions Manual

Page: 216 / 330

1070080029 / 05 Bosch Rexroth AG Electric Drives
and Controls PST 6xx0 | | 216 /330
Information on this product
5.2.4 Modules
5.2.4.1 ”CC Ethernet 100 Mbit“ module
Features:
•
Ethernet plug-in module on the basis of an AnyBus module .
• Fast Ethernet (100 Mbit/s), full-duplex mode
• Available as 1-port or 2-port variant. 2-port variant with integrated
switch
• Integrated WEB server
• Simple IP configuration
Function:
For the simultaneous connection of several timers to the host level via
Ethernet (e.g. connection BOS programming terminal).
2
1
3
4
5
A
PST 6xx0.xxx
Fig.7: ”CC Ethernet 100 Mbit” module with AnyBus module ”CC Ethernet 100 Mbit” (1-port variant)
A Screw for attachment of the module 1 Screws for attachment of the AnyBus module
2 NS LED: Network status.
Off: No power supply or no IP address
Green The module is active or in wait mode
Green, flashing Waiting for connection
Red
Double IP address or fatal event
Red, flashing Module not active
3 Ethernet port. RJ45 female connector
4 LINK LED: Connection status.
Off No connection, no activity
Green Connection established
Green, flickering Data transmission active
5 MS LED: Module status.
Off No power supply
Green Normal function
Red Severe error or fatal event
Red, flashing Light error
Use the "Anybus IPconfig" software for the configuration of the
Ethernet (installation file is included in the BOS software package,
refer to BOS data medium: directory path "Tools/Anybus”).
ENGLISH