7.4
32.4
115.4
117.4
269
409.8
70.3
410.8
Fig. 10-6: Housing dimensions of the device VR3015, top view
10.4 Installation notes
●
Provide a space of 50 mm on all sides for sufficient cooling and cable routing.
●
The LED display on the operator panel must not be covered.
●
Wire all cables in loops. Use strain reliefs for all cables.
●
Install the operator display only vertically, with a max. deviation of ±45°,
measured from the vertical.
●
Do not lay the CDI cables in parallel to motor cables or to other noise
sources, as the CDI connection can be disturbed. Keep the maximum distance
possible from interference sources.
10.5 Installing components
10.5.1 Replacing the CMOS battery
To replace the CMOS battery BR2032, open the cover on the top of the housing.
22/45
Mounting, demounting and electric installation
PR30 and VR30 Control Cabinet PC and
Panel PC
Bosch Rexroth AG R911384706_Edition 01
