![Bosch Rexroth NYCe 4000 Instructions Manual Download Page 17](http://html.mh-extra.com/html/bosch/rexroth-nyce-4000/rexroth-nyce-4000_instructions-manual_39418017.webp)
The system housings described in the present instructions, comply with the
requirements and the target of the following EU directive and with the following
harmonized European standards:
●
Low Voltage Directive 2014/35/EU
This product is a built-in unit which, owing to its installation characteristics, is
not able to comply with the regulations for complete apparatus, machines or
installations from the outset. For this reason, it may only be used for built-in
purposes. The product may only be assessed with regard to its electrical and
mechanical safety as well as to environmental effects (foreign bodies, moisture)
after it has been installed in the product intended for the final user. After the
product has been installed, its EMC properties may change. Hence the product
intended for the final user (complete apparatus, machines or installations)
should be inspected with regard to its EMC properties by the manufacturer of
the product intended for the final user.
●
EMC Directive 2014/30/EU
Maintaining the EMC directive presuppose an EMC adapted installation of the
devices within the installation of the machine. The complied limit values and
standards are specified in the Rexroth Manual of associated product. The
regulations for the structure and the installation in this manual must be
maintained and realized. Tests were run using a typical installation in a test
assembly that conforms with the standards. These Rexroth products are built-in
devices for a product for the final user. The test results cannot be transferred to
every state as installed in every product intended for the final user. This
declaration does not therefore assure the EMC characteristics of the product for
the final user.
8.3 UL certification
Fig. 8-2: UL Listed logo
The system housings
●
NYS04.2-ST-01-ULNN-NY4013
●
NYS04.2-ST-02-ULNN-NY4023
●
NYS04.2-ST-03-ULNN-NY4033
●
NYS04.2-ST-04-ULNN-NY4043
●
NYS04.2-ST-05-ULNN-NY4053
are certified according to
NYCe 4000 Multi-axis motion control
system
11/45
Standards
R911337318_Edition 09 Bosch Rexroth AG