3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 193
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
9.6
Job
The job function is used to run process chains. The process chains (e.g. Scan barcode
Enable
nutrunner
three tightenings
Block nutrunner) that are usually programmed using a PLC can be
directly parameterized in the NEXO-OS operating system as so-called jobs.
Use this menu item to create and edit jobs. The jobs are parameterized similarly as tightening programs
with a job being a sequence of internal steps, see
9.6.1
Structure of the Job tab
The header of the
Job
tab features the following buttons:
On its left, it shows icons to start various functions:
As of Nexo firmware version 1100, the job function is supported.
Table 9–20:
Job tab
Element
Description
Up to 256 jobs can be programmed.
Saves the current job.
Opens the
Job information
dialog. There you can save a comment on the current job,
max. 1000 characters.
Admissible characters are ASCII characters, numbers, spaces, hyphens, dashes and
underscore.
Deletes the current job. This displays a prompt asking whether the user really wishes
to remove the job.
Opens the
Name
dialog. There you can enter a new name for the job.
Table 9–21:
Job - functions
Element
Description
Adds an individual program.
Adds an ID input step. A maximum of five ID code steps can be added before an
individual program step.
Opens the dialog for editing the selected step.
Deletes the selected step.
Opens the
Import
dialog. Select the corresponding Job that is to be imported.
Opens a dialog for exporting the job.
Opens the
Import all
dialog to import all defined jobs.
Opens a dialog to export all jobs.
