Bosch rexroth MS2N03-A Operating Manual Download Page 53

Page: 53 / 72

53 / 72

MS2N

Electrical connection

Bosch Rexroth AG

R911347581, Edition 05

Turn the nut clockwise (arrow direction

“close”)
Tightening torque hand-tight or 1.5 Nm.

At a minimum, the lock must be turned by

approx. 20° (at least 3 clicks), or until the

marking a is in the area b.

🡆

Should this position be reached, the

connector is safely locked.

Secure the cables, that accruing forces

due to cable vibrations onto the connector

are prevented.

Disconnect SpeedTec connector

Turn the nut counterclockwise (arrow

direction “open”)

Straight and evenly disconnect the con-

nector from the mounting box.

🡆

The plug is disconnected.

7.4.18 Plug-in connector with

threaded connection

WARNING

Risk of personal injury or damage to property

due to disconnecting or connecting live plug con-

nections!

−

Only disconnect or connect plug connec-

tions when they are dry and de-energized.

−

During operation of the system, all plug con-

nections must be firmly locked or screwed

tight.

Observe when connecting the flange sockets:

•

Protect the device connectors from external

force effect.

•

Connect the motor to ready-made connec-

tion cables.

Connect the plug-in connector with the
threaded connector M58

Before connecting, please ensure properly meas-

ured ready-made connection cables are available.

The type, size and cable cross section of the

plug-in connector must be adjusted to the motor.

sembl

Summary of Contents for rexroth MS2N03-A









































































Search results

Summary of Contents for rexroth MS2N03-A

Reviews:

Related manuals for rexroth MS2N03-A

Brands by name

Popular brands

Bosch rexroth MS2N03-A, Operating Manual

Search results

Summary of Contents for rexroth MS2N03-A

Reviews:

Related manuals for rexroth MS2N03-A

Brands by name

Popular brands