Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 11 / 382

1 Introduction
1.1 About this Documentation
WARNING
Personal injury and property damage caused by incorrect project plan‐
ning for applications, machines and installations!
Observe the contents of the reference documentations relevant to your drive
system (see chapter 1.2 Reference Documentations , page 1 ).
In particular, take the Project Planning Manual “Rexroth IndraDrive, Drive Sys‐
tem” into account.
Purpose of Documentation This documentation provides information on
●
how to configure Rexroth IndraDrive systems
● considering the components
–
HMV supply units
– HMS, HMD, HCS02, HCS03 power sections
Changes in Comparison to Previ‐
ous Edition
Chapter Changes
Power Sections for Converters HCS02, HCS03: technical data for order code ‑L***
added
Power Sections for Inverters HMS01.1N-W0350: technical data added
IndraDrive M Supply Units separate connection diagram made available for
HMV01.1R-W0120
Functions and Electrical Connec‐
tion Points
X33, Acknowledge messages mains contactor ex‐
tended; differences integrated/external mains con‐
tactor included
X40, Acknowledge messages external mains con‐
tactor added (HMV01.1R-W0120)
Accessories accessories HAS01 and HAS02 added
Fig.1-1: Changes
1.2 Reference Documentations
1.2.1 Overview
The following documentations contain detailed information on the
●
allowed applications
● application, ambient and operating conditions
● technical properties of the components
Reference documentations - drive controllers
Title Kind of documentation Document typecode 1)
Rexroth IndraDrive – Drive System Project Planning Manual DOK-INDRV*-SYSTEM*****-PRxx-EN-P
Rexroth IndraDrive Supply Units and Pow‐
er Sections
Project Planning Manual DOK-INDRV*-HMV-S-D+HCS-PR01-EN-P
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 1/369
Introduction