Risk of damaging the Safety extension module if
not expressly stated accessories, mounting
parts and other components, cables, lines and
software and firmware are used
NOTICE
The Safety extension module IndraControl XFE01.1-SY-01 may only be used as
intended and combined with the accessories and attachments specified in this
documentation. Components that are not expressly mentioned must neither be
attached nor connected. It is strictly prohibited to change and operate
components (individual parts) as well as using firmware that is not permitted.
The Safety extension module IndraControl XFE01.1-SY-01 may only be operated
under the mounting, installation and ambient conditions (such as temperature,
protection class, humidity, EMC) specified in this documentation. Also refer to
chapter 6 "Ambient conditions" on page 8
A typical area of application of the Safety extension module IndraControl
XFE01.1-SY-01 is the implementation of safety-related controls for:
●
Handling and mounting systems
●
Food and packaging machines
●
Printing and processing machines
●
Machine tools
●
Compactors
●
Foundry and rolling technology
●
Conveying engineering
●
Building automation
●
Special purpose machines
●
Wood processing machines
●
Hydraulic machines
The operation is not permitted for the following systems according to the
following standards and guidelines:
●
Lifts (directive 2006/42/EC)
●
ATEX (directive 2014/34/EU)
●
Burner control systems (DIN EN 298)
●
Safety systems for unfired pressure vessels (DIN EN 764-7:2002/AC:2006)
IndraControl XFE01.1-SY-01 Safety Ex-
tension Module
7/45
Intended use
R911376654_Edition 03 Bosch Rexroth AG
