1.6
Front Panel of the IndraControl VEH 30.2
①
USB connection
②
Stop button
③
Membrane Keyboard
④
Display
⑤
Installation point for override
⑥
Installation point for electronic handwheel
Fig.1-1:
Front view of the IndraControl VEH 30.2
1.7
Connection to the Control
The IndraControl VEH 30.2 hand-held terminal is connected to the control via
the IndraControl VAC 30.2 connection module. At the front side a 17-pin fe‐
male
connector
allows
the
comfortable
connection
of
a
IndraControl VEH 30.2. All clamps for fix wiring to the control are located on
the rear side of the connection module in the control cabinet.
The VAC 30.2 connection module is suitable for hand-held terminals with
stop pushbutton. The connection module is equipped with a fine thread
screwed plug on the front side. The integrated "automatic stop button jumper‐
ing" allows to integrate both channels of the stop button of the hand-held ter‐
minal into the safety circuit of the running machine without accidental shut‐
down of the machine.
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
Bosch Rexroth AG
7/109
System Presentation