Bosch Rexroth IndraControl VEH 30.1, Project Planning Manual

Page: 67 / 96

IndraControl VEP30.2 40.2 and 50.2 Software
9-5
DOK-SUPPL*-VEP**.2****-PR01-EN-P
Visualization
Selection of the start application: The selection box "start PLC
automatically (license needed)" is only a display function. It indicates, if
the PLC is automatically started. It is ensured, that the PLC is started
before the visualization.
•
None: The visualization software is not automatically started.
•
Remote Desktop: Autostart of the Remote Desktop Client. A PC with
Remote Desktop Server in the network is operated by remote control
via the IndraControl VEP.
•
Web Browser: Start of a web visualization.
•
WinStudio: Autostart of file
StorageCard\Rexroth\Winstudio\startup.cmd. The user can modify the
file to adapt the start behavior.
If WinStudio was selected, the OPC server is registered and the
corresponding information is entered in the OPCServer.ini.
•
VisiWin: Autostart of file StorageCard\Rexroth\Winstudio\startup.cmd.
The user can modify the file to adapt the start behavior.
•
UserStart: Autostart of file StorageCard\Rexroth\User\startup.cmd. If
this option is selected, in contrast to all other selection possibilities the
PLC is not automatically started. The user can define the complete
start process in this file.
•
Upload from DataSource: Downloads file startup.cmd via FTP from
the control (Visualization Data Source) to
StorageCard\Rexroth\startup.cmd. To be able to do so, a FTP server
must be activated on the control.
Rexroth CE Settings – Data Server
In this tab the start of FTP, WEB and Telnet server can be set.
Server_VEP2.bmp
Fig. 9-6: Rexroth CE Settings – Data Server