Bosch Rexroth IndraControl VAM 11.1, Project Planning Manual

Page: 69 / 86

8.5.2 Override Rotary Switch
General Information
0
Min
1
2
Max
Max
① Feed override
② Spindle override (not available for customized variant)
Fig.8-7: Override rotary switch – schematic
The positions of the rotary switches (inputs) of the override module are mapped
at the fieldbus in the "Override VB" module.
Gray Code Table for both Override Rotary Switches
Switch position D C B A
0 (min.) 0 0 0 0
1 0 0 0 1
2 0 0 1 1
3 0 0 1 0
4 0 1 1 0
5 0 1 1 1
6 0 1 0 1
7 0 1 0 0
8 1 1 0 0
9 1 1 0 1
10 1 1 1 1
11 1 1 1 0
12 1 0 1 0
13 1 0 1 1
14 1 0 0 1
15 (max.) 1 0 0 0
Fig.8-8: Gray code table
DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels Bosch Rexroth AG 67/83
Commissioning