10/60
General notes on property and product damage
Bosch Rexroth AG
, MIT: HQ 5/H, HQ 5/XH, 3 842 558 544/2017-07
• Make sure that access to maintenance and inspection points is kept free of
obstacles.
• Perform the prescribed maintenance work at the intervals specifi ed in
section 10.3 “Maintenance”.
• Make sure that no line connectors, connections or components are disconnected
as long as the system is supplied with pressure and voltage. Secure the system
against being switched back on.
• Dispose of the product in accordance with the regulations in your country.
2.7 Personal protective equipment
• Appropriate protective clothing is to be worn when handling the product (e.g.
safety shoes, close-fi tting clothing, a hair net for long, loose hair).
As the system user or operator, you are personally responsible for ensuring the use
of appropriate protective equipment when the product is being used.
All components of the personal protective equipment must be intact.
2.8
Operator's obligations
• Before the initial start-up or re-commissioning of a conveyor system, run a risk
assessment in accordance with DIN EN ISO 12100.
• Please also refer to the residual risks of the individual components (see the section 8.2
“Residual risks” on page 35).
• Before the initial start-up, make sure there are no protruding or sharp-edged parts
that may be a hazard to personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before initial start-up
or re-commissioning, and then at regular intervals.
3 General notes on property and product
damage
The warranty only applies to the delivered confi guration.
• The warranty is void in the event of faulty installation, commissioning and
operation, as well as improper use and/or improper handling.
• Prevent cleaning agents from getting into the system.
• Never use solvents or aggressive cleaning agents.
• Do not use a high-pressure cleaner for cleaning.
During maintenance
and repair
During disposal
During cleaning
